Detailed Description

A pure analysis process to generate histograms with detector channels activity

The TRestRawSignalChannelActivityProcess allows to generate different
histograms in order to monitor the number of times a channel has observed
a raw signal given a set of conditions on the threshold and number of active
channels.

TRestRawSignalChannelActivityProcess produces different channel activity
histograms involving raw signals. These histograms thus show the activity
of the channels before zero suppression, which can be useful to perform
noise studies.

The following list describes the different histograms that are generated:

* **daqChannelActivityRaw**: Histogram based on the DAQ channels.
The following figure shows the DAQ channel activity histogram for raw
signals in:
    * a) the case where all the channels are saved (where a flat
         distribution is seen because all channels have the same raw
         activity)
    * b) the case where only channels that have been hit are saved.

\htmlonly <style>div.image img[src="daqChActRaw.png"]{width:1000px;}</style>

///

rChannelActivityRaw: histogram based on the readout channels, i.e., after converting the daq channel numbering into readout channel numbering based on the .dec file.
rChannelActivityRaw_N: where N can be 1, 2, 3 or M (multi), is a histogram based on the readout channels, i.e., after converting the daq channel numbering into readout channel numbering based on the .dec file, that contains the events with N number of signals above the lowThreshold set by the user.
rChannelActivityRaw_NH: where N can be 1, 2, 3 or M (multi), is a histogram based on the readout channels, i.e., after converting the daq channel numbering into readout channel numbering based on the .dec file, that contains the events with N number of signals above the highThreshold set by the user.

The number of channels and their numbering can be specified by the user to match the detector being used.

Warning: ⚠ REST is under continous development. This documentation is offered to you by the REST community. Your HELP is needed to keep this code up to date. Your feedback will be worth to support this software, please report any problems/suggestions you may find while using it at The REST Framework forum. You are welcome to contribute fixing typos, updating information or adding/proposing new contributions. See also our Contribution Guide.

RESTsoft - Software for Rare Event Searches with TPCs

History of developments:

2020-August: First implementation of raw signal channel activity process. Cristina Margalejo

Author: Cristina Margalejo

Definition at line 33 of file TRestRawSignalChannelActivityProcess.h.

#include <TRestRawSignalChannelActivityProcess.h>

Inheritance diagram for TRestRawSignalChannelActivityProcess:

Public Member Functions
	ClassDefOverride (TRestRawSignalChannelActivityProcess, 4)

void	EndProcess () override
	Function to include required actions after all events have been processed. In this process it will take care of writing the histograms to disk.

RESTValue	GetInputEvent () const override
	Get pointer to input event. Must be implemented in the derived class.

RESTValue	GetOutputEvent () const override
	Get pointer to output event. Must be implemented in the derived class.

const char *	GetProcessName () const override
	Returns the name of this process.

void	InitProcess () override
	Process initialization. The ROOT TH1 histograms are created here using the limits defined in the process metadata members. More...

void	PrintMetadata () override
	It prints out the process parameters stored in the metadata structure.

TRestEvent *	ProcessEvent (TRestEvent *inputEvent) override
	The main processing event function.

	TRestRawSignalChannelActivityProcess ()
	Default constructor.

	~TRestRawSignalChannelActivityProcess ()
	Default destructor.

Public Member Functions inherited from TRestEventProcess
virtual Bool_t	AddInputFile (const std::string &file)

bool	ApplyCut ()

virtual void	BeginOfEventProcess (TRestEvent *inputEvent=nullptr)
	Begin of event process, preparation work. Called right before ProcessEvent()

	ClassDefOverride (TRestEventProcess, 3)

virtual void	EndOfEventProcess (TRestEvent *inputEvent=nullptr)
	End of event process. Nothing to do. Called directly after ProcessEvent()

TRestAnalysisTree *	GetAnalysisTree () const
	Return the local analysis tree (dummy)

TCanvas *	GetCanvas () const
	Get canvas.

TRestAnalysisTree *	GetFullAnalysisTree ()

std::vector< std::string >	GetListOfAddedObservables ()

TRestRun *	GetRunInfo () const
	Return the pointer of the hosting TRestRun object.

virtual Long64_t	GetTotalBytes () const

virtual Long64_t	GetTotalBytesRead () const
	Interface to external file reading, get the read bytes. To be implemented in external processes.

virtual void	InitFromConfigFile () override
	To make settings from rml file. This method must be implemented in the derived class.

Bool_t	isExternal () const
	Return whether this process is external process.

Int_t	LoadSectionMetadata () override
	This method does some preparation of xml section. More...

virtual void	NotifyAnalysisTreeReset ()
	In case the analysis tree is reset(switched to new file), some process needs to have action.

virtual Bool_t	OpenInputFiles (const std::vector< std::string > &files)

std::vector< std::string >	ReadObservables ()

void	RegisterAllObservables (Bool_t value=true)

virtual Bool_t	ResetEntry ()

void	SetAnalysisTree (TRestAnalysisTree *tree)
	Set analysis tree of this process, then add observables to it.

void	SetCanvasSize (Int_t x, Int_t y)
	Set canvas size.

void	SetFriendProcess (TRestEventProcess *p)
	Add friendly process to this process.

void	SetObservableValidation (bool validate)

void	SetParallelProcess (TRestEventProcess *p)
	Add parallel process to this process.

void	SetRunInfo (TRestRun *r)
	Set TRestRun for this process.

Bool_t	singleThreadOnly () const
	Return whether this process is single std::thread only.

	TRestEventProcess ()

	~TRestEventProcess ()

Public Member Functions inherited from TRestMetadata
void	AddLog (std::string log="", bool print=true)
	Add logs to messageBuffer.

void	DoNotStore ()
	If this method is called the metadata information will not be stored in disk.

TVector2	Get2DVectorParameterWithUnits (std::string parName, TVector2 defaultValue=TVector2(-1, -1))

TVector3	Get3DVectorParameterWithUnits (std::string parName, TVector3 defaultValue=TVector3(-1, -1, -1))

TString	GetCommit ()
	Returns the REST commit value stored in fCommit.

std::string	GetConfigBuffer ()
	Returns the config section of this class.

std::string	GetDataMemberValue (std::string memberName)
	Get the value of data member as string. More...

std::vector< std::string >	GetDataMemberValues (std::string memberName, Int_t precision=0)
	Get the value of datamember as a vector of strings. More...

TString	GetDataPath ()
	Returns a std::string with the path used for data storage.

Double_t	GetDblParameterWithUnits (std::string parName, Double_t defaultValue=PARAMETER_NOT_FOUND_DBL)
	Gets the value of the parameter name parName, after applying unit conversion. More...

Bool_t	GetError () const
	It returns true if an error was identified by a derived metadata class.

TString	GetErrorMessage ()
	Returns a std::string containing the error message.

TString	GetLibraryVersion ()
	Returns the REST libraty version stored in fLibraryVersion.

TString	GetMainDataPath ()
	Gets a std::string with the path used for data storage.

Int_t	GetNumberOfErrors () const

Int_t	GetNumberOfWarnings () const

std::string	GetParameter (std::string parName, TString defaultValue=PARAMETER_NOT_FOUND_STR)
	Returns corresponding REST Metadata parameter from multiple sources. More...

std::string	GetSectionName ()
	Returns the section name of this class, defined at the beginning of fSectionName.

TRestStringOutput::REST_Verbose_Level	GetVerboseLevel ()
	returns the verboselevel in type of REST_Verbose_Level enumerator

TString	GetVerboseLevelString ()
	returns the verbose level in type of TString More...

TString	GetVersion ()
	Returns the REST version stored in fVersion.

Int_t	GetVersionCode ()

UInt_t	GetVersionMajor () const

UInt_t	GetVersionMinor () const

UInt_t	GetVersionPatch () const

Bool_t	GetWarning () const
	It returns true if an error was identified by a derived metadata class.

TString	GetWarningMessage ()
	Returns a std::string containing the warning message.

TRestMetadata *	InstantiateChildMetadata (int index, std::string pattern="")
	This method will retrieve a new TRestMetadata instance of a child element of the present TRestMetadata instance based on the `index` given by argument, which defines the element order to be retrieved, 0 for first element found, 1 for the second element found, etc. More...

TRestMetadata *	InstantiateChildMetadata (std::string pattern="", std::string name="")
	This method will retrieve a new TRestMetadata instance of a child element of the present TRestMetadata instance based on the `name` given by argument. More...

Bool_t	isCleanState () const

Bool_t	isOfficialRelease () const

Int_t	LoadConfigFromBuffer ()
	Initialize data from a string element buffer. More...

Int_t	LoadConfigFromElement (TiXmlElement eSectional, TiXmlElement eGlobal, std::map< std::string, std::string > envs={})
	Main starter method. More...

Int_t	LoadConfigFromFile (const std::string &configFilename, const std::string &sectionName="")
	Give the file name, find out the corresponding section. Then call the main starter.

virtual void	Merge (const TRestMetadata &)

TRestMetadata &	operator= (const TRestMetadata &)

void	Print ()
	Implementing TObject::Print() method.

void	PrintConfigBuffer ()
	Print the config xml section stored in the class. More...

void	PrintMessageBuffer ()
	Print the buffered message.

void	PrintTimeStamp (Double_t timeStamp)
	Print the current time on local machine. More...

void	SetConfigFile (std::string configFilename)
	set config file path from external

void	SetError (std::string message="", bool print=true, int maxPrint=5)
	A metadata class may use this method to signal that something went wrong.

void	SetHostmgr (TRestManager *m)
	Set the host manager for this class.

void	SetSectionName (std::string sName)
	set the section name, clear the section content

void	SetVerboseLevel (TRestStringOutput::REST_Verbose_Level v)
	sets the verbose level

void	SetWarning (std::string message="", bool print=true, int maxPrint=5)
	A metadata class may use this method to signal that something went wrong.

void	Store ()
	If this method is called the metadata information will be stored in disk.

	TRestMetadata (const TRestMetadata &)

virtual void	UpdateMetadataMembers ()
	Method to allow implementation of specific metadata members updates at inherited classes.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0)
	overwriting the write() method with fStore considered

void	WriteConfigBuffer (std::string fName)
	Writes the config buffer to a file in append mode.

	~TRestMetadata ()
	TRestMetadata default destructor.

Protected Attributes
Int_t	fDaqChannels = 300
	The number of bins at the daq channels histogram.

TH1D *	fDaqChannelsHisto = nullptr
	The daq channels histogram.

Int_t	fDaqEndChannel = 4620
	The last channel at the daq channels histogram.

Int_t	fDaqStartChannel = 4320
	The first channel at the daq channels histogram.

Double_t	fHighThreshold = 50
	The value of the higher signal threshold to add it to the histogram.

Double_t	fLowThreshold = 25
	The value of the lower signal threshold to add it to the histogram.

Protected Attributes inherited from TRestEventProcess
TRestAnalysisTree *	fAnalysisTree = nullptr

TCanvas *	fCanvas = nullptr
	< Canvas for some viewer event

TVector2	fCanvasSize
	Canvas size.

std::vector< std::pair< std::string, TVector2 > >	fCuts
	Stores cut definitions. Any listed observables should be in the range. More...

bool	fDynamicObs = false
	It defines whether to use added observables only or all the observables appear in the code.

bool	fIsExternal = false
	It defines if the process reads event data from an external source.

std::map< std::string, int >	fObservablesDefined
	Stores the list of all the appeared process observables in the code. More...

std::map< std::string, int >	fObservablesUpdated
	Stores the list of process observables updated when processing this event.

bool	fReadOnly = false
	not used, keep for compatibility

TRestRun *	fRunInfo = nullptr
	< Pointer to TRestRun object where to find metadata.

bool	fSingleThreadOnly = false

bool	fValidateObservables = false
	It defines if observable names should be added to the validation list.

Protected Attributes inherited from TRestMetadata
std::string	configBuffer
	The buffer where the corresponding metadata section is stored. Filled only during Write()

std::string	fConfigFileName
	Full name of the rml file. More...

std::map< std::string, std::string >	fConstants
	Saving a list of rml constants. name-value std::pair. Constants are temporary for this class only.

TiXmlElement *	fElement
	Saving the sectional element together with global element.

TiXmlElement *	fElementGlobal
	Saving the global element, to be passed to the resident class, if necessary.

Bool_t	fError = false
	It can be used as a way to identify that something went wrong using SetError method.

TString	fErrorMessage = ""
	A std::string to store an optional error message through method SetError.

TRestManager *	fHostmgr
	All metadata classes can be initialized and managed by TRestManager.

Int_t	fNErrors = 0
	It counts the number of errors notified.

Int_t	fNWarnings = 0
	It counts the number of warnings notified.

std::string	fSectionName
	Section name given in the constructor of the derived metadata class.

Bool_t	fStore
	This variable is used to determine if the metadata structure should be stored in the ROOT file.

std::map< std::string, std::string >	fVariables
	Saving a list of rml variables. name-value std::pair.

TRestStringOutput::REST_Verbose_Level	fVerboseLevel
	Verbose level used to print debug info.

Bool_t	fWarning = false
	It can be used as a way to identify that something went wrong using SetWarning method.

TString	fWarningMessage = ""
	It can be used as a way to identify that something went wrong using SetWarning method.

std::string	messageBuffer
	The buffer to store the output message through TRestStringOutput in this class.

endl_t	RESTendl
	Termination flag object for TRestStringOutput.

Private Member Functions
void	Initialize () override
	Function to initialize input/output event members and define the section name.

Private Attributes
TRestRawSignalEvent *	fSignalEvent = nullptr
	A pointer to the specific TRestRawSignalEvent input.

Additional Inherited Members
Protected Types inherited from TRestEventProcess
enum	REST_Process_Output { No_Output , Observable , Internal_Var , Full_Output }

Protected Member Functions inherited from TRestEventProcess
void	BeginPrintProcess ()
	[name, cut range]

void	CreateCanvas ()
	Create the canvas.

void	EndPrintProcess ()

TRestEventProcess *	GetFriend (const std::string &nameOrType)

TRestEventProcess *	GetFriendLive (const std::string &nameOrType)

template<class T >
T *	GetMetadata ()
	Get a metadata object from the host TRestRun. More...

TRestMetadata *	GetMetadata (const std::string &nameOrType)

size_t	GetNumberOfParallelProcesses () const

template<class T >
T	GetObservableValue (const std::string &name)

TRestEventProcess *	GetParallel (int i)

template<class T >
std::vector< T >	GetParallelDataMembers (T *member_of_process)
	Get a list of data members from parallel processes which is same to this process's certain data member. More...

template<class T >
void	SetObservableValue (const std::string &name, const T &value)
	Set observable value for AnalysisTree. More...

Protected Member Functions inherited from TRestMetadata
std::string	ElementToString (TiXmlElement *ele)
	Convert an TiXmlElement object to string. More...

TVector2	Get2DVectorParameterWithUnits (std::string parName, TiXmlElement *e, TVector2 defaultValue=TVector2(-1, -1))

TVector3	Get3DVectorParameterWithUnits (std::string parName, TiXmlElement *e, TVector3 defaultValue=TVector3(-1, -1, -1))

Double_t	GetDblParameterWithUnits (std::string parName, TiXmlElement *e, Double_t defaultVal=PARAMETER_NOT_FOUND_DBL)

TiXmlElement *	GetElement (std::string eleDeclare, TiXmlElement *e=nullptr)
	Get an xml element from a given parent element, according to its declaration.

TiXmlElement *	GetElementFromFile (std::string configFilename, std::string NameOrDecalre="")
	Open an xml encoded file and find its element. More...

TiXmlElement *	GetElementWithName (std::string eleDeclare, std::string eleName)
	Get an xml element from the default location, according to its declaration and its field "name".

TiXmlElement *	GetElementWithName (std::string eleDeclare, std::string eleName, TiXmlElement *e)
	Get an xml element from a given parent element, according to its declaration and its field "name".

std::string	GetFieldValue (std::string fieldName, std::string definition, size_t fromPosition=0)
	Gets field value in an xml element string by parsing it as TiXmlElement.

std::string	GetFieldValue (std::string parName, TiXmlElement *e)
	Returns the field value of an xml element which has the specified name. More...

std::string	GetKEYDefinition (std::string keyName)
	Gets the first key definition for keyName found inside buffer starting at fromPosition. More...

std::string	GetKEYDefinition (std::string keyName, size_t &Position)

std::string	GetKEYDefinition (std::string keyName, size_t &Position, std::string buffer)

std::string	GetKEYDefinition (std::string keyName, std::string buffer)

std::string	GetKEYStructure (std::string keyName)
	Gets the first key structure for keyName found inside buffer after fromPosition. More...

std::string	GetKEYStructure (std::string keyName, size_t &Position)

std::string	GetKEYStructure (std::string keyName, size_t &Position, std::string buffer)

std::string	GetKEYStructure (std::string keyName, size_t &Position, TiXmlElement *ele)

std::string	GetKEYStructure (std::string keyName, std::string buffer)

TiXmlElement *	GetNextElement (TiXmlElement *e)
	Get the next sibling xml element of this element, with same eleDeclare.

std::string	GetParameter (std::string parName, size_t &pos, std::string inputString)
	Returns the value for the parameter name parName found in inputString. More...

std::string	GetParameter (std::string parName, TiXmlElement *e, TString defaultValue=PARAMETER_NOT_FOUND_STR)
	Returns the value for the parameter named parName in the given section. More...

std::pair< std::string, std::string >	GetParameterAndUnits (std::string parname, TiXmlElement *e=nullptr)
	Returns the unit string of the given parameter of the given xml section. More...

std::map< std::string, std::string >	GetParametersList ()
	It retrieves a map of all parameter:value found in the metadata class.

TString	GetSearchPath ()

virtual void	InitFromRootFile ()
	Method called after the object is retrieved from root file.

void	ReadAllParameters ()
	Reflection methods, Set value of a datamember in class according to TRestMetadata::fElement. More...

void	ReadParametersList (std::map< std::string, std::string > &list)
	It reads a parameter list and associates it to its corresponding metadata member. par0 --> fPar0.

std::string	ReplaceConstants (const std::string buffer)
	Identifies "constants" in the input buffer, and replace them with corresponding value. More...

std::string	ReplaceVariables (const std::string buffer)
	Identifies environmental variable replacing marks in the input buffer, and replace them with corresponding value. More...

void	ReSetVersion ()
	Resets the version of TRestRun to REST_RELEASE. Only TRestRun is allowed to update version.

std::string	SearchFile (std::string filename)
	Search files in current directory and directories specified in "searchPath" section. More...

void	SetLibraryVersion (TString version)
	Set the library version of this metadata class.

TiXmlElement *	StringToElement (std::string definition)
	Parsing a string into TiXmlElement object. More...

	TRestMetadata ()
	TRestMetadata default constructor.

	TRestMetadata (const char *configFilename)
	constructor

void	UnSetVersion ()
	Resets the version of TRestRun to -1, in case the file is old REST file. Only TRestRun is allowed to update version.

Member Function Documentation

◆ InitProcess()

void TRestRawSignalChannelActivityProcess::InitProcess ( )

overridevirtual

Process initialization. The ROOT TH1 histograms are created here using the limits defined in the process metadata members.

The readout histograms will only be created in case an appropiate readout definition is found in the processing chain.

Reimplemented from TRestEventProcess.

Definition at line 135 of file TRestRawSignalChannelActivityProcess.cxx.

The documentation for this class was generated from the following files:

Detailed Description

Public Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Additional Inherited Members

Member Function Documentation

◆ InitProcess()